Phone:  (06) 345 7017

Concrete Equipment

  • Bull Float and Telescopic handle

    Min

    1/2 Day

    Day

    $10$15$20

     

    Our light-weight Bull Float with extension handle is great for spreading and levelling concrete. The Bull Float pole measures 150 mm x 1200 mm and is constructed of rigid alloy, providing a level surface without excess weight. With a unique release mechanism, a twist of the pole will break any suction and allow the bull float to be lifted from the wet concrete with minimal disruption to the surface. The telescopic handle measures 2.5 m but will extend to 4.6m. Ideal for initial concrete floating, especially for large jobs such as foundation pads.

  • Harrison Hiremaster wanganui jack hammer makita jack

    Concrete Breaker Large Electric

    Min

    1/2 Day

    Day

    $40$65$90

     

    Point and/or chisel extra

     

    Our Makita HM1810 heavy demolition hammer delivers 2.0 KW of grunt to knock over the toughest of jobs. This hammer is well suited to heavy demolition, especially where you can take advantage of its 32kg weight. It delivers 1100 blows per minute with kinetic vibration of 8 m/s2, and will fracture most forms of concrete. This unit produces up to 107 dB(A) of noise so hearing protection must be worn.

     

    Select either a point or chisel point (additional $8 per day).

  • Concrete Breaker Large Petrol

    Min

    1/2 Day

    Day

    $60$95$140

     

    Point and/or chisel extra

     

    Our Wacker BH23 Concrete Breaker is ideal where electricity is unavailable. This unit is powered by a two-stroke 80 cc motor delivering 2.7 HP and up to 1300 impacts per minute.

    The breaker measures 840 mm x 470 mm x 350 mm and weighs 29 kg (gross weight).

  • Harrison Hiremaster Wanganui Hire rent Makita Concrete breaker a kango Kanjo

    Concrete Breaker Medium Electric

    Min

    1/2 Day

    Day

    $30$45$60

     

    Point and/or chisel extra

     

    Our Makita HM1317 Demolition hammer is an ideal tool for general demolition and for breaking reinforced slabs, up to 100 mm depth. It delivers 730 – 1450 blows per minute and weighs a manageable 17 kg. The motor is a decent 1.5KW and it makes a bit of noise, so hearing protection must be worn.

    Select either a point, spade or chisel point (additional $8 per day).

     

  • Small Concrete breaker kango hammer wanganui hire centre Harrisons

    Concrete Breaker Small Electric

    Min

    1/2 Day

    Day

    $20$35$45

     

    Point and/or chisel extra

     

    Our Makita HM0871C demolition hammer is ideal for demolishing concrete block construction, or where access is difficult. This tool is ergonomically designed to allow for demolition against the pull of gravity. The motor delivers 1.1KW of power and 1100 to 2650 blows per minute.

    Select either a point or chisel bit (additional $8 per day)

  • Concrete Cutter Husqvarna

    Min

    1/2 Day

    Day

    $45$60$85

     

    Note: Blade wear additional.

    The Dimas Concrete saw is mounted on a trolley and designed for accurate cuts.

  • Concrete Cutter Stihl 12″

    Min

    1/2 Day

    Day

    $40$55$80

     

    Note: Blade wear extra

  • Wanganui Hire Centre Concrete saw Stihl petrol

    Concrete Cutter Stihl 14″

    Min

    1/2 Day

    Day

    $40$55$80

     

    Our Stihl 350mm concrete saw is ideal for cutting concrete above and below ground. The 350mm cutting wheels will cut to 125mm deep, with straight cuts made easy with the pivot legs. The two stroke 67cc motor puts out a healthy 4.4 HP. The saw weighs a manageable 9.6 kg, and has a hose attachment to reduce dust and lubricate the blade. Note: Blade use is calculated and charged accordingly.

     

  • Harrison Hiremaster Wanganui concrete mixer electric

    Concrete Mixer Electric Towable

    Min

    1/2 Day

    Day

    $25$35$50

     

    Our electric concrete mixer is portable and robust. The unit is powered by a single phase electric and is road registered, allowing you to mix concrete with mobility.